Manufacturers / Mizuno / ST190 Driver / Adapter settings
Adapter settings, decodedMizuno ST190 Driver adapter settings chart
The ST190 Driver uses the Mizuno Quick Switch (ST200 Series) adapter (Mizuno connector system), Quick Switch (GT180/ST180 2018, ST190/ST190G 2019, ST200/ST200X/ST200G 2020, ST-G 220/ST-X/ST-Z 2021, ST-X 220/ST-Z 220 2022).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| STANDARDFactory | std | std | square | Factory ship setting (Mizuno's own STANDARD position on the adaptability chart). |
| STANDARD/LOWER-1 | -1.125° | +0.75° | 1.5 open | Intermediate position on Mizuno's adjustability wheel between STANDARD and LOWER; not individually named by Mizuno. |
| LOWER | -2.25° | +1.5° | 3 open | Label taken verbatim from Mizuno's chart. Maximum lower-loft setting. |
| LOWER/UPRIGHT-1 | -1.125° | +2.25° | 1.5 open | Intermediate position on Mizuno's adjustability wheel between LOWER and UPRIGHT; not individually named by Mizuno. |
| UPRIGHT | std | +3° | square | Label taken verbatim from Mizuno's chart. Same stated loft as STANDARD but 3 degrees more upright. |
| UPRIGHT/HIGHER-1 | +1.125° | +2.25° | 1.5 closed | Intermediate position on Mizuno's adjustability wheel between UPRIGHT and HIGHER; not individually named by Mizuno. |
| HIGHER | +2.25° | +1.5° | 3 closed | Label taken verbatim from Mizuno's chart. Maximum higher-loft setting. |
| HIGHER/STANDARD-1 | +1.125° | +0.75° | 1.5 closed | Intermediate position on Mizuno's adjustability wheel between HIGHER and STANDARD; not individually named by Mizuno. |
Already-cited ShaftConnect listing groups "ST-190 & ST-190G" under the same SKU as ST200/ST-X 230/ST-Z 230. Golf Club Trader (https://www.thegolfclubtrader.com/products/new-2019-mizuno-st190-st-gt180-jpx900-driver-adapter-sleeve-oem-quality-335-rh) fits-list independently states "Fits Mizuno JPX One, ST-MAX, ST-G, ST-Z 230, ST-X 230, ST-Z 220, ST-X 220, ST200, ST190, ST/GT180, JPX900." Quick Switch adjustable hosel (loft +/- 2 deg in 0.75 deg increments) confirmed by equipment press (golfstorageguide ST190 adjustment guide). Classified to nearest registered predecessor adapter.
Compatible shafts: what fits this head
Settings from Mizuno ST200 Driver Product Page.
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.