Manufacturers / Cobra / DS-Adapt X Fairway / Adapter settings
Adapter settings, decodedCobra DS-Adapt X Fairway adapter settings chart
The DS-Adapt X Fairway uses the Cobra FutureFit33 adapter (Cobra connector system), FutureFit33 (DS-Adapt to OPTM, 2025 to present).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| C7 | +2° | std | - | HIGHEST position on Cobra's chart: maximum loft increase at standard lie. |
| C8 | +1.7° | +0.7° | - | - |
| B7 | +1.7° | -0.7° | - | - |
| D8 | +1.4° | +1.4° | - | - |
| D6 | +1.4° | std | - | - |
| B6 | +1.4° | -1.4° | - | - |
| C1 | +1° | +1° | - | - |
| A7 | +1° | -1° | - | - |
| D1 | +0.7° | +1.7° | - | - |
| B1 | +0.7° | +0.3° | - | - |
| A8 | +0.7° | -0.3° | - | - |
| A6 | +0.7° | -1.7° | - | - |
| C2 | +0.3° | +0.7° | - | - |
| C4 | +0.3° | -0.7° | - | - |
| E1 | std | +2° | - | LEFT position on Cobra's chart: standard loft at the most upright lie setting. |
| D2 | std | +1.4° | - | - |
| A1Factory | std | std | - | Factory ship setting (stated loft, standard lie; the center of Cobra's chart). |
| B4 | std | -1.4° | - | - |
| A5 | std | -2° | - | RIGHT position on Cobra's chart: standard loft at the flattest lie setting. |
| D3 | -0.3° | +0.7° | - | - |
| B3 | -0.3° | -0.7° | - | - |
| F1 | -0.7° | +1.7° | - | - |
| H1 | -0.7° | +0.3° | - | - |
| A2 | -0.7° | -0.3° | - | - |
| A4 | -0.7° | -1.7° | - | - |
| G1 | -1° | +1° | - | - |
| A3 | -1° | -1° | - | - |
| F2 | -1.4° | +1.4° | - | - |
| F4 | -1.4° | std | - | - |
| H4 | -1.4° | -1.4° | - | - |
| F3 | -1.7° | +0.7° | - | - |
| G4 | -1.7° | -0.7° | - | - |
| G3 | -2° | std | - | LOWEST position on Cobra's chart: maximum loft decrease at standard lie. |
Two independent vendor product pages, each directly fetched, confirm ONE physical FutureFit33 sleeve serves driver AND fairway: GolfWorks CB9042 ('Cobra FUTUREFIT33 Driver/Fairway .335" Adaptor') and ShaftConnect's 'Cobra DS-ADAPT FutureFit33 Driver/FW Compatible Shaft Adapter' ('All DS-ADAPT Models (Driver & Fairway)'). Model-specific fairway confirmation: https://www.cobragolf.com/products/ds-adapt-x-fairway, directly fetched, manufacturer spec table states verbatim 'LOFT RANGE (FF33) +/-2 degrees' and 'LIE RANGE (FF33) +/-2 degrees' with per-loft absolute ranges (e.g. 3: 13.0-17.0 deg loft, 56.0-60.0 deg lie).
Compatible shafts: what fits this head
Settings from FUTUREFIT33 - COBRA Golf.
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.