Manufacturers / Cleveland Golf / Launcher XL 2 Draw Driver / Adapter settings
Adapter settings, decodedCleveland Golf Launcher XL 2 Draw Driver adapter settings chart
The Launcher XL 2 Draw Driver uses the Cleveland Launcher XL QTS Sleeve adapter (Cleveland connector system), QTS Sleeve (Launcher XL and XL2, 2021/2022 to 2024).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| 10.5Factory | std | std | square | Factory ship setting for the 10.5 degree head (Cleveland's own STANDARD position). |
| 11.0 | +0.5° | -0.5° | square | Label is the absolute loft printed on Cleveland's sleeve for this position. |
| 11.5 | +1° | -1° | slightly closed | Label is the absolute loft printed on Cleveland's sleeve for this position. |
| 12.0 | +1.5° | -1.5° | slightly closed | Label is the absolute loft printed on Cleveland's sleeve for this position. Maximum higher-loft setting. |
| 11.5 FL | +1° | -2° | slightly closed | Label is the absolute loft printed on Cleveland's sleeve for this position ('FL' = flatter-lie variant of the same 11.5 degree loft). |
| 11.0 FL | +0.5° | -2.5° | square | Label is the absolute loft printed on Cleveland's sleeve for this position ('FL' = flatter-lie variant of the same 11.0 degree loft). |
| 10.5 FL | std | -3° | square | Label is the absolute loft printed on Cleveland's sleeve for this position. Same stated loft as the 10.5 standard position but maximally flat lie. |
| 10.0 FL | -0.5° | -2.5° | square | Label is the absolute loft printed on Cleveland's sleeve for this position ('FL' = flatter-lie variant of the same 10.0 degree loft). |
| 9.5 FL | -1° | -2° | slightly open | Label is the absolute loft printed on Cleveland's sleeve for this position ('FL' = flatter-lie variant of the same 9.5 degree loft). |
| 9.0 | -1.5° | -1.5° | slightly open | Label is the absolute loft printed on Cleveland's sleeve for this position. Maximum lower-loft setting. |
| 9.5 | -1° | -1° | slightly open | Label is the absolute loft printed on Cleveland's sleeve for this position. |
| 10.0 | -0.5° | -0.5° | square | Label is the absolute loft printed on Cleveland's sleeve for this position. |
Confirmed via Today's Golfer's Launcher XL 2 Draw driver review: 'the Launcher XL 2 has an adjustable hosel,' with spec table 'Adjustable hosel: Yes (12 different positions).' Cross-checked against Carl's Golfland ('Adjustable hosel allows you to fine-tune launch angle, distance, and shot shape through 12 optional positions') and TGW ('Adjustable hosel sleeve goes from 9 to 12 degrees in 0.5 degree increments for 12 possible adjustments'). Classified to cleveland-launcher-xl-qts on Diamond Tour Golf's Cleveland driver adapter fits-list (diamondtour.com/cleveland-driver-shaft-adapter.html), which covers 'Launcher XL 2 Drivers' without trim qualification, plus the identical 12-position half-degree structure to the base Launcher XL 2's registered sleeve; no source names the Draw trim against the sleeve individually.
Compatible shafts: what fits this head
Settings from Cleveland Launcher XL Woods Product Manual (EU).
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.