Manufacturers / TaylorMade / R7 Quad Mini Driver / Adapter settings
Adapter settings, decodedTaylorMade R7 Quad Mini Driver adapter settings chart
The R7 Quad Mini Driver uses the TaylorMade Loft Sleeve (4 degree) adapter (TaylorMade connector system), M3/M4 (2018) to present (4 degree 12 position).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| STD LOFTFactory | std | std | square | Factory ship setting: stated loft and square face at standard lie. |
| STD/LOWER-1 | -0.75° | +0.5° | 1.5 open | Intermediate position on TaylorMade's loft sleeve wheel between STD LOFT and LOWER; not individually named by TaylorMade. |
| STD/LOWER-2 | -1.5° | +1.25° | 3 open | Intermediate position on TaylorMade's loft sleeve wheel between STD LOFT and LOWER; not individually named by TaylorMade. |
| LOWER | -2° | +2° | 4 open | Label taken verbatim from TaylorMade's chart. Maximum lower-loft setting. |
| LOWER/UPRT-1 | -1.5° | +2.75° | 3 open | Intermediate position on TaylorMade's loft sleeve wheel between LOWER and UPRT; not individually named by TaylorMade. |
| LOWER/UPRT-2 | -0.75° | +3.5° | 1.5 open | Intermediate position on TaylorMade's loft sleeve wheel between LOWER and UPRT; not individually named by TaylorMade. |
| UPRT | std | +4° | square | Same stated loft and square face as STD LOFT but at a lie angle 4 degrees more upright. |
| UPRT/HIGHER-1 | +0.75° | +3.5° | 1.5 closed | Intermediate position on TaylorMade's loft sleeve wheel between UPRT and HIGHER; not individually named by TaylorMade. |
| UPRT/HIGHER-2 | +1.5° | +2.75° | 3 closed | Intermediate position on TaylorMade's loft sleeve wheel between UPRT and HIGHER; not individually named by TaylorMade. |
| HIGHER | +2° | +2° | 4 closed | Label taken verbatim from TaylorMade's chart. Maximum higher-loft setting. |
| HIGHER/STD-1 | +1.5° | +1.25° | 3 closed | Intermediate position on TaylorMade's loft sleeve wheel between HIGHER and STD LOFT; not individually named by TaylorMade. |
| HIGHER/STD-2 | +0.75° | +0.5° | 1.5 closed | Intermediate position on TaylorMade's loft sleeve wheel between HIGHER and STD LOFT; not individually named by TaylorMade. |
Confirmed via Golf Monthly's R7 Quad Mini driver review (golfmonthly.com/reviews/drivers/taylormade-r7-quad-mini-driver-review): 'if you want a more neutral position you can easily achieve that by manipulating the loft sleeve.' Cross-checked against National Club Golfer's review (nationalclubgolfer.com/us/reviews/drivers/taylormade-r7-quad-mini-driver-review/): 'the TaylorMade loft sleeve for even more adjustability.' Both outlets name the loft sleeve for this exact 2025 model, confirming the retro re-release does not reuse the original 2004 r7 quad's glued hosel. No source publishes a numeric adjustment range for this model; classified to tm-loft-sleeve-4 as TaylorMade's single registered loft-sleeve system.
Compatible shafts: what fits this head
Settings from TaylorMade Driver/Fairway Loft Sleeve Settings.
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.