Manufacturers / TaylorMade / M4 Tour Fairway / Adapter settings
Adapter settings, decodedTaylorMade M4 Tour Fairway adapter settings chart
The M4 Tour Fairway uses the TaylorMade Loft Sleeve (4 degree) adapter (TaylorMade connector system), M3/M4 (2018) to present (4 degree 12 position).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| STD LOFTFactory | std | std | square | Factory ship setting: stated loft and square face at standard lie. |
| STD/LOWER-1 | -0.75° | +0.5° | 1.5 open | Intermediate position on TaylorMade's loft sleeve wheel between STD LOFT and LOWER; not individually named by TaylorMade. |
| STD/LOWER-2 | -1.5° | +1.25° | 3 open | Intermediate position on TaylorMade's loft sleeve wheel between STD LOFT and LOWER; not individually named by TaylorMade. |
| LOWER | -2° | +2° | 4 open | Label taken verbatim from TaylorMade's chart. Maximum lower-loft setting. |
| LOWER/UPRT-1 | -1.5° | +2.75° | 3 open | Intermediate position on TaylorMade's loft sleeve wheel between LOWER and UPRT; not individually named by TaylorMade. |
| LOWER/UPRT-2 | -0.75° | +3.5° | 1.5 open | Intermediate position on TaylorMade's loft sleeve wheel between LOWER and UPRT; not individually named by TaylorMade. |
| UPRT | std | +4° | square | Same stated loft and square face as STD LOFT but at a lie angle 4 degrees more upright. |
| UPRT/HIGHER-1 | +0.75° | +3.5° | 1.5 closed | Intermediate position on TaylorMade's loft sleeve wheel between UPRT and HIGHER; not individually named by TaylorMade. |
| UPRT/HIGHER-2 | +1.5° | +2.75° | 3 closed | Intermediate position on TaylorMade's loft sleeve wheel between UPRT and HIGHER; not individually named by TaylorMade. |
| HIGHER | +2° | +2° | 4 closed | Label taken verbatim from TaylorMade's chart. Maximum higher-loft setting. |
| HIGHER/STD-1 | +1.5° | +1.25° | 3 closed | Intermediate position on TaylorMade's loft sleeve wheel between HIGHER and STD LOFT; not individually named by TaylorMade. |
| HIGHER/STD-2 | +0.75° | +0.5° | 1.5 closed | Intermediate position on TaylorMade's loft sleeve wheel between HIGHER and STD LOFT; not individually named by TaylorMade. |
The Golf Club Trader's and Hireko Golf's 'Driver / Fairway Adapter Sleeve' listings (already this adapter's own Task 4 citation) name this generation directly and treat driver and fairway as one physical .335 SKU. TaylorMade's own M6 Tuning Guide (also this adapter's citation) is silent on whether the fairway wood's loft-sleeve section specifically covers the M6/M6 D-Type FAIRWAY (its Step 1 text says 'of the M6/M6 D-Type drivers'; a separate Step 2 passage about the D-Type draw-bias weight, not the loft sleeve, does say the D-Type feature is 'available in both the M6 Driver and Fairway Woods'), so this classification rests on the vendor-grouped SKU rather than a first-party fairway-specific sentence, one confidence tier below the SIM/Qi10 rows.
Compatible shafts: what fits this head
Settings from TaylorMade Driver/Fairway Loft Sleeve Settings.
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.