Manufacturers / Srixon / ZX7 Mk II Driver / Adapter settings
Adapter settings, decodedSrixon ZX7 Mk II Driver adapter settings chart
The ZX7 Mk II Driver uses the Srixon QTS Sleeve adapter (Srixon connector system), QTS Sleeve (Z785 to ZX5 Mk II/ZX5 LS Mk II/ZX7 Mk II, 2018 to 2023).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| STD LOFTFactory | std | std | square | Factory ship setting (Srixon's own 'Initial' position on the QTS wheel). |
| STD LOFT/+1LOFT-1 | +0.5° | std | 1 closed | Intermediate position on Srixon's QTS wheel between STD LOFT and +1LOFT; not individually named by Srixon. |
| STD LOFT/+1LOFT-2 | +1° | -0.5° | 1.5 closed | Intermediate position on Srixon's QTS wheel between STD LOFT and +1LOFT; not individually named by Srixon. |
| +1LOFT | +1° | -1° | 2 closed | Label taken verbatim from Srixon's chart. Maximum higher-loft setting. |
| +1LOFT/STD FL-1 | +1° | -1.5° | 1.5 closed | Intermediate position on Srixon's QTS wheel between +1LOFT and STD FL; not individually named by Srixon. |
| +1LOFT/STD FL-2 | +0.5° | -2° | 1 closed | Intermediate position on Srixon's QTS wheel between +1LOFT and STD FL; not individually named by Srixon. |
| STD FL | std | -2° | square | Label taken verbatim from Srixon's chart ('Standard Flat'). Same stated loft as STD LOFT but 2 degrees flatter. |
| STD FL/-1LOFT-1 | -0.5° | -2° | 1 open | Intermediate position on Srixon's QTS wheel between STD FL and -1LOFT; not individually named by Srixon. |
| STD FL/-1LOFT-2 | -1° | -1.5° | 1.5 open | Intermediate position on Srixon's QTS wheel between STD FL and -1LOFT; not individually named by Srixon. |
| -1LOFT | -1° | -1° | 2 open | Label taken verbatim from Srixon's chart. Maximum lower-loft setting. |
| -1LOFT/STD LOFT-1 | -1° | -0.5° | 1.5 open | Intermediate position on Srixon's QTS wheel between -1LOFT and STD LOFT; not individually named by Srixon. |
| -1LOFT/STD LOFT-2 | -0.5° | std | 1 open | Intermediate position on Srixon's QTS wheel between -1LOFT and STD LOFT; not individually named by Srixon. |
Confirmed via live Dunlop Sports US product pages for the Mk II models referencing the identical hosel_sleeve_adjustability image set as the 2021 manual, cited in the adapter's curation_notes as confirming one QTS generation spans ZX5/ZX7 (2021) through the Mk II (2023) drivers.
Compatible shafts: what fits this head
Settings from Srixon ZX Woods Product Manual (EU).
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.