Manufacturers / Srixon / ZX5 Driver / Adapter settings
Adapter settings, decodedSrixon ZX5 Driver adapter settings chart
The ZX5 Driver uses the Srixon QTS Sleeve adapter (Srixon connector system), QTS Sleeve (Z785 to ZX5 Mk II/ZX5 LS Mk II/ZX7 Mk II, 2018 to 2023).
Values apply to right-handed heads. Left-handed mappings differ for some systems; consult the manufacturer's left-handed chart.
Interactive adjustment guide
Enter your head's stated loft, then pick a position to decode it, or pick a loft change to see which positions get you there.
| Position | Loft | Lie | Face angle | Notes |
|---|---|---|---|---|
| STD LOFTFactory | std | std | square | Factory ship setting (Srixon's own 'Initial' position on the QTS wheel). |
| STD LOFT/+1LOFT-1 | +0.5° | std | 1 closed | Intermediate position on Srixon's QTS wheel between STD LOFT and +1LOFT; not individually named by Srixon. |
| STD LOFT/+1LOFT-2 | +1° | -0.5° | 1.5 closed | Intermediate position on Srixon's QTS wheel between STD LOFT and +1LOFT; not individually named by Srixon. |
| +1LOFT | +1° | -1° | 2 closed | Label taken verbatim from Srixon's chart. Maximum higher-loft setting. |
| +1LOFT/STD FL-1 | +1° | -1.5° | 1.5 closed | Intermediate position on Srixon's QTS wheel between +1LOFT and STD FL; not individually named by Srixon. |
| +1LOFT/STD FL-2 | +0.5° | -2° | 1 closed | Intermediate position on Srixon's QTS wheel between +1LOFT and STD FL; not individually named by Srixon. |
| STD FL | std | -2° | square | Label taken verbatim from Srixon's chart ('Standard Flat'). Same stated loft as STD LOFT but 2 degrees flatter. |
| STD FL/-1LOFT-1 | -0.5° | -2° | 1 open | Intermediate position on Srixon's QTS wheel between STD FL and -1LOFT; not individually named by Srixon. |
| STD FL/-1LOFT-2 | -1° | -1.5° | 1.5 open | Intermediate position on Srixon's QTS wheel between STD FL and -1LOFT; not individually named by Srixon. |
| -1LOFT | -1° | -1° | 2 open | Label taken verbatim from Srixon's chart. Maximum lower-loft setting. |
| -1LOFT/STD LOFT-1 | -1° | -0.5° | 1.5 open | Intermediate position on Srixon's QTS wheel between -1LOFT and STD LOFT; not individually named by Srixon. |
| -1LOFT/STD LOFT-2 | -0.5° | std | 1 open | Intermediate position on Srixon's QTS wheel between -1LOFT and STD LOFT; not individually named by Srixon. |
Confirmed via Srixon's own 'ZX Woods Product Manual' (EU) and the bilingual JP/EN ZX7/ZX5 Instruction Manual, both already cited in the adapter's curation_notes as documenting the identical 12 position QTS sleeve for the 2021 ZX5/ZX7 drivers.
Compatible shafts: what fits this head
Settings from Srixon ZX Woods Product Manual (EU).
Thanks. We verify every report against a source before updating the data.
Something went wrong with that report. Please try again.